Linear MP3 DVD Radio Wire Plug Harness VM9311TS VM9410 VM9311 VM9511TS, Metra 70 1771 Radio Wiring Harness for Ford/Lincoln/Mazda 1998 Up. JENSEN CD4010k CAR STEREO FACE PLATE $11.99, JENSEN VM9510TS VM9511TS Brand NEW Faceplate assembly with PCB $35.00, Jensen CR1610. Manuals and user guide free PDF downloads for Jensen UV8 - Phase Linear.
Jensen Vm9311ts Remote
Best Car Stereo System Speakers
. 1 AnswerSOURCE:Heres the best way to fix;Quote from manual'Programmable Turn-On Volume (Pg.12)This feature allows the user to select a turn-on colume setting regardless of the colume setting prior to turning the unit off. To program a specific volume level, push and hold the VOL/LOC/DV know (6) while the yellow volume bar is displayed on the screen. The unit will beep two times to confirm your turn-on volume setting.'
Ah i had the same problem. I turned to the manual and it worked for me:)Good Luck,ErnPosted on Nov 30, 2006.
5VM9311TSINSTALLATIONPre-installation1.Press the metal levers on both sides to remove the half- sleeve from the radio.2.Install the half-sleeve.a. Install adapter if necessary (optional). Install half-sleeve into adapter or dashboard (use onlythe supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.c. Locate the series of bend-tabs along the top, bottomand sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.d.
Install support strap to make the unit more stable.CAUTION! Be careful not to damage the carwiring.3.Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.WiringComplete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal. If there is no ACC available, connect the ACC lead to the power supply with a switch.NOTE: When replacing a fuse, be sure to usecorrect type and amperage to avoid damagingthe radio. The VM9311TS uses one 10 amp mini-ATM fuse, located in the black filter box in-linewith the main wire harness.Final InstallationAfter completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on).
If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.1.Connect wiring adapter to existing wiring harness.2.Connect antenna lead.3.Carefully slide the radio into the half-sleeve, making sure it is right-side-up, until it is fully seated and the spring clips lock it into place.NOTE: For proper operation of the CD/DVD player,the chassis must be mounted within 20° ofhorizontal. Make sure the unit is mounted withinthis limitation.4.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.CAUTION!